Canon Mg7700 Mac Manualeagleecho

  1. The procedure for printing a color document in monochrome is as follows: Select Quality & Media from the pop-up menu on the Print Dialog. Set grayscale printing. Check the Grayscale Printing check box.
  2. Printer Firmware Updater (Mac) for MG7700 series Ver.1.0 Mac OS X v10.6 This updater will upgrade your printer's firmware to version 1.050. To perform this upgrade, a USB cable and a computer are needed.
  3. Canon PRINT Business Canon PRINT Business Canon PRINT Business. Scan from Canon multi-function devices to a mobile device, upload scans to cloud storage services, attach to and send emails, and print.
  1. Checking Network Information
Mg7700

Checking Machine IP Address or MAC Address

Canon Mg7700 Mac Manualeagleecho

To check the machine's IP Address or MAC address, print out the network settings information or use the operation panel to display it.

You can check the network setting information on the computer screen.

OS X v10.10, OS X v10.9, Mac OS X v10.8, Mac OS X v10.7, Mac OS X v10.6 About Printer Firmware Package: Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

  • For Windows:

  • For Mac OS:

Canon Mg7700 Printer Driver Mac

Checking Computer IP Address or MAC Address

To check the IP Address or MAC address of your computer, follow the instructions below.

  • For Windows:

    1. Select Command Prompt as shown below.

      • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen.If Command Prompt is not displayed on the Start screen, select the Search charm and search for 'Command Prompt'.

      • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt.

    2. Enter 'ipconfig/all' and press Enter.

      The IP address and MAC address of your computer appear.If your computer is not connected to a network, the IP address does not appear.

Driver
  • For Mac OS:

    1. Select System Preferences from Apple menu, and then click Network.

    2. Make sure network interface used by computer is selected, and then click Advanced.

      When you are using wireless LAN on your computer, make sure Wi-Fi is selected as network interface.When you are using wired LAN, make sure Ethernet is selected.

    3. Check the IP address or MAC address.

      Click TCP/IP to check the IP address.

      Click Hardware to check the MAC address.

Checking Communication Between the Computer, the Printer, and the Wireless Router

Perform a ping test to check if communication is taking place.

  • For Windows:

    1. Select Command Prompt as shown below.

      • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen.If Command Prompt is not displayed on the Start screen, select the Search charm and search for 'Command Prompt'.

      • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt.

    2. Type ping command and press Enter.

      The ping command is as follows: ping XXX.XXX.XXX.XXX

      'XXX.XXX.XXX.XXX' is the IP address of the target device.

      If communication is taking place, a message like the one shown below appears.

      Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255

      If Request timed out appears, communication is not taking place.

  • For Mac OS:

    1. Start Network Utility as shown below.

      • In Mac OS X v10.10 or Mac OS X v10.9, select Computer from Go menu of Finder, double-click Macintosh HD > System > Library > CoreServices > Applications > Network Utility.

      • In Mac OS X v10.8 or Mac OS X v10.7, open Utilities folder in Applications folder and double-click Network Utility.

    2. Click Ping.

    3. Make sure Send only XX pings (XX are numbers) is selected.

    4. Enter IP address of target machine or target wireless router in Enter the network address to ping.

    5. Click Ping.

      'XXX.XXX.XXX.XXX' is the IP address of the target device.

      A message such as the following appears.

      64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms

      64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms

      64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms

      --- XXX.XXX.XXX.XXX ping statistics ---

      3 packets transmitted, 3 packets received, 0% packet loss

      If packet loss is 100%, communication is not taking place.Otherwise, computer is communicating with target device.

Checking Network Settings Information

To check the machine's network settings information, print out the network settings information or use the operation panel to display it.

  1. LAN settings
  • Change LAN

    Enables either wireless LAN, wired LAN, or direct connection.You can also disable all.

  • Wireless LAN setup

    Selects the setup method for wireless LAN connection.

    Note

    • You can also enter this setting menu by selecting LAN settings on the HOME screen.In this case, enable wireless LAN.

    • Cableless setup

      Select if you specify the settings of the access point information to the machine directly from a device (such as a smartphone) without operating the wireless router.Follow the on-screen instructions of the connecting device for the setup procedure.

    • Standard setup

      Select when you perform settings for wireless LAN manually using the operation panel of the machine.

    • WPS (Push button method)

      Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method.Follow the on-screen instructions during setup.

    • Other setup

      • Advanced setup

        Select when you perform settings for wireless LAN manually.You can specify multiple WEP keys.

      • WPS (PIN code method)

        Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method.Follow the on-screen instructions during setup.

  • Confirm LAN settings

    The list of wireless/wired LAN settings or the direct connection of this machine is displayed on the touch screen.Selecting Print LAN details allows you to print the list.

    • WLAN setting list

      The list of wireless LAN settings of this machine is displayed on the touch screen.

      The following setting items are displayed.

      Items

      Setting

      Connection

      Active/Inactive

      SSID

      XXXXXXXXXXXXXXXX
      XXXXXXXXXXXXXXXX (up to 32 characters)

      Communication mode

      Infrastructure

      Channel

      XX (up to 2 digits)

      Wireless LAN security

      Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)

      IPv4 address

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 subnet mask

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 default gateway

      XXX. XXX. XXX. XXX (12 characters)

      IPv6 address

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      IPv6 subnet prefix length

      XXX (up to 3 digits)

      IPv6 default gateway

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      MAC address

      XX:XX:XX:XX:XX:XX (12 characters)

      IPsec settings

      Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable

      Pre-shared key

      XXXXXXXXXXXXXXXX (16 characters)

      Printer name

      XXXXXXXXXXXXXXX (up to 15 characters)

      Bonjour service name

      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX (up to 52 characters)

      ('XX' represents alphanumeric characters.)

    • LAN setting list

      The list of wired LAN settings of this machine is displayed on the touch screen.

      The following setting items are displayed.

      Items

      Setting

      Connection

      Active/Inactive

      IPv4 address

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 subnet mask

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 default gateway

      XXX. XXX. XXX. XXX (12 characters)

      IPv6 address

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      IPv6 subnet prefix length

      XXX (up to 3 digits)

      IPv6 default gateway

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      MAC address

      XX:XX:XX:XX:XX:XX (12 characters)

      IPsec settings

      Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable

      Pre-shared key

      XXXXXXXXXXXXXXXX (16 characters)

      Printer name

      XXXXXXXXXXXXXXX (up to 15 characters)

      Bonjour service name

      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX (up to 52 characters)

      ('XX' represents alphanumeric characters.)

    • Direct connection setting list

      The list of direct connection settings of this machine is displayed on the touch screen.

      The following setting items are displayed.

      Items

      Setting

      Connection

      Active/Inactive

      SSID

      DIRECT-XXXX-XXXXXXseries

      Password

      XXXXXXXXXX (10 characters)

      Communication mode

      Direct connection

      Channel

      3

      Wireless LAN security

      WPA2-PSK(AES)

      IPv4 address

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 subnet mask

      XXX. XXX. XXX. XXX (12 characters)

      IPv4 default gateway

      XXX. XXX. XXX. XXX (12 characters)

      IPv6 address

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      IPv6 subnet prefix length

      XXX (up to 3 digits)

      IPv6 default gateway

      XXXX: XXXX: XXXX: XXXX:
      XXXX: XXXX: XXXX: XXXX (32 characters)

      MAC address

      XX:XX:XX:XX:XX:XX (12 characters)

      IPsec settings

      Disable

      Pre-shared key

      XXXXXXXXXXXXXXXX (16 characters)

      Printer name

      XXXXXXXXXXXXXXX (up to 15 characters)

      Bonjour service name

      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX
      XXXXXXXXXXXXX (up to 52 characters)

      Direct connection device name

      XXXXXX-XXXXXXseries

      ('XX' represents alphanumeric characters.)

    • Print LAN details

      You can print out the network settings of the machine such as its IP address and SSID.

      For more information on the machine's network setting is printed out:

      Important

      • The network settings printout contains important information about your network.Handle it with care.

  • Other settings

    Important

    • You cannot select the items below when Disable LAN is selected for Change LAN.

    • Set printer name

      Specifies the printer name.You can use up to 15 characters for the name.

      Note

      • You cannot change this setting with the memory card inserted in the card slot.

      • You cannot use the same printer name as that already used for other LAN connected devices.

      • You cannot use a hyphen for the initial or last character of the printer name.

    • TCP/IP settings

      Performs IPv4 or IPv6 setting.

    • WSD setting

      Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista).

      • Enable/disable WSD

        Selects whether WSD is enabled or disabled.

        Note

        • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7, and Windows Vista.

      • WSD scan from this device

        Selecting Enable allows you to transfer the scanned data to the computer using WSD.

      • Timeout setting

        Specifies the timeout length.

    • Bonjour settings

      Setting items for LAN using Bonjour for Mac OS.

      • Enable/disable Bonjour

        Selecting Enable allows you to use Bonjour to perform the network settings.

      • Service name

        Specifies the Bonjour service name.You can use up to 48 characters for the name.

        Note

        • You cannot use the same service name as that already used for other LAN connected devices.

    • LPR protocol setting

      Enables/disables the LPR setting.

    • PictBridge communication

      Setting items for printing from a PictBridge (Wireless LAN) compliant device.

      • Enable/disable communication

        Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.

      • Timeout setting

        Specifies the timeout length.

    • Wired LAN DRX setting

      Selecting Enable allows you to activate discontinuous reception when the machine is connected to a device compatible with wired LAN.It allows you to save electricity.

    • Direct connection settings

      Setting items are available when you connect a wireless communication device such as a smartphone or tablet to the machine.

      Important

      • You can select these setting items only when Activate direct connect. is selected for Change LAN.

      • Update SSID/password

        Selecting Yes updates the identifier (SSID) and password for direct connection.

      • Change device name

        Changes the machine's name displayed on a Wi-Fi Direct compatible device.

      • Connection request confirmation

        Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the machine.

Canon Mg7700 Mac ManualeagleechoCanon Mg7700 Mac Manualeagleecho

Canon Mg7700 Software